kLine Hi-Temp Silicone 200 ml Pressure cartridge black
The parts to be sealed must be clean, free of grease and dry.
Permanent seal: Apply sealing bead and allow to harden. kLine Hi-Temp Silicone only adheres to the sealing surface. The parts can be dismantled and reassembled without damage.
Wet seal: Apply sealing bead and mount parts immediately. Remove any product that oozes out mechanically after curing.
Application restrictions: Not suitable for PP, PE, Teflon and bitumen substrates, among other things.
kLine Hi-Temp Silicone cannot be painted over.
Handling: Turn the adjusting screw on the dosing bracket clockwise. The dosing bar lifts accordingly. Remove the cap. Squeeze out material by operating the dosing handle. Further processing as with other commercially available silicone.
After use, turn the adjusting screw counterclockwise to seal the cartridge airtight. Put on the cap.
Recommended items
For bonding parts to be joined with high dynamic loads. Hand tight in 2-5 minutes. Final …
consisting of pressure regulator, manometer and associated connections
Can be used with all 50 ml models of S-type and rectangular cartridges. Low costs. Only …
Ideal for powerful cleaning of brake lines, hoses, discs, cylinders and drums. Prevents the brakes from …
Hardener for kLine Bodyguard product range
Extremely robust coating for vehicle floors, wheel housings, etc. with long-lasting protection against corrosion, road salt …
